Dell Force10 S4820T FTOS Command Reference Guide - Page 252

www.dell.com | support.dell.com Command History Version 8.1.1.0 Version 7.6.1.0 Version 7.5.1.0 Version 7.4.1.0 pre-Version 6.1.1.0 Introduced on E-Series ExaScale Support added for S-Series Support added for C-Series Added monitor option Introduced for E-Series Note: When ACL logging and byte counters are configured simultaneously, byte counters may display an incorrect value. Configure packet counters with logging instead. Usage Information Related Commands When you use the log option, the CP processor logs details about the packets that match. Depending on how many packets match the log entry and at what rate, the CP may become busy as it has to log these packets' details. deny permit Configure a filter to drop traffic. Configure a filter to forward traffic. IP Prefix List Commands When an access-list is created without any rule and then applied to an interface, ACL behavior reflects implicit permit. Use these commands to configure or enable IP prefix lists. • clear ip prefix-list • deny • ip prefix-list • permit • seq • show config • show ip prefix-list detail • show ip prefix-list summary clear ip prefix-list c e s Reset the number of times traffic met the conditions ("hit" counters) of the configured prefix lists. Syntax clear ip prefix-list [prefix-name] Parameters prefix-name (OPTIONAL) Enter the name of the configured prefix list to clear only counters for that prefix list, up to 140 characters long. 252 | Access Control Lists (ACL)