Dell Force10 S4820T FTOS Command Reference Guide - Page 1120

www.dell.com | support.dell.com Link State ID: 1.0.0.1 Advertising Router: 10.16.1.160 LS Seq Number: 0x80000416 Checksum: 0x376 Length: 28 Opaque Type: 1 Opaque ID: 1 Unable to display opaque data LS age: 833 Options: (No TOS-capability, No DC, E) LS type: Type-10 Opaque Link Area Link State ID: 1.0.0.2 Advertising Router: 10.16.1.160 LS Seq Number: 0x80000002 Checksum: 0x19c2 --More-- Table 37-7. Command Example Descriptions: show ip ospf process-id database opaque-area Item LS Age Options LS Type Link State ID Advertising Router Checksum Length Opaque Type Opaque ID Description Displays the LSA's age. Displays the optional capabilities available on router. The following options can be found in this item: • TOS-capability or No TOS-capability is displayed depending on whether the router can support Type of Service. • DC or No DC is displayed depending on whether the originating router can support OSPF over demand circuits. • E or No E is displayed on whether the originating router can accept AS External LSAs. Displays the LSA's type. Displays the Link State ID. Identifies the advertising router's ID. Displays the Fletcher checksum of the an LSA's complete contents. Displays the length in bytes of the LSA. Displays the Opaque type field (the first 8 bits of the Link State ID). Displays the Opaque type-specific ID (the remaining 24 bits of the Link State ID). Related Commands show ip ospf database Displays OSPF database information. show ip ospf database opaque-as c e s Display the opaque-as (type 11) LSA information. Syntax show ip ospf process-id database opaque-as [link-state-id] [adv-router ip-address] 1120 | Open Shortest Path First (OSPFv2)