Dell Force10 S4820T FTOS Command Reference Guide - Page 89
pre-con d slot, execute
View all Dell Force10 S4820T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 89 highlights
Defaults Command Modes Command History Usage Information Related Commands Not configured CONFIGURATION Version 8.1.1.0 Introduced on E-Series ExaScale Version 7.6.1.0 Introduced on S-Series Version 7.5.1.0 Introduced on C-Series E-Series original Command You cannot delete a terminal connection. access-class password show linecard Restrict incoming connections to a particular IP address in an IP access control list (ACL). Specify a password for users on terminal lines. Display the line card(s) status. linecard c e Syntax Parameters Defaults Command Modes Command History Usage Information Pre-configure a line card in a currently empty slot of the system or a different line card type for the slot. To pre-configure a 4-port 40G line card, refer to the linecard command. linecard number card-type number card-type Enter the number of the slot. C-Series Range: 0-7 E-Series Range: 0 to 13 on a E1200/E1200i, 0 to 6 on a E600/E6001, and 0 to 5 on a E300. Enter the line card ID ( the Supported Hardware section in the Release Notes). Not configured CONFIGURATION Version 8.1.1.2 Introduced on E-Series ExaScale E600i Version 8.1.1.0 Introduced on E-Series ExaScale E1200i Version 7.5.1.0 Introduced on C-Series E-Series original Command Use this command only for empty slots or a slot where you have hot-swapped a different line card type. Before inserting a card of a different type into the pre-configured slot, execute the no linecard number command. The following screenshot shows the current supported C-Series line cards, along with their "card types" (card-type IDs). Control and Monitoring | 89