Dell Force10 S4820T FTOS Command Reference Guide - Page 1154

www.dell.com | support.dell.com This system is the Bootstrap Router (v2) BSR address: 7.7.7.7 (?) Uptime: 16:59:06, BSR Priority: 0, Hash mask length: 30 Next bootstrap message in 00:00:08 This system is a candidate BSR Candidate BSR address: 7.7.7.7, priority: 0, hash mask length: 30 show ip pim interface c e s View information on the interfaces with IP PIM enabled. Syntax Command Modes Command History Example show ip pim interface EXEC EXEC Privilege Version 8.3.19.0 Version 8.3.12.0 Version 8.1.1.0 Version 7.8.1.0 Introduced on S4820T Introduced on the S4810. Introduced on E-Series ExaScale Introduced on S-Series E600-7-RPM0#show ip pim interface Address Interface Ver/ Nbr Query DR DR Mode Count Intvl Prio 172.21.200.254 Gi 7/9 v2/S 0 30 1 172.21.200.254 172.60.1.2 Gi 7/11 v2/S 0 30 1 172.60.1.2 192.3.1.1Gi 7/16 v2/S 1 30 1 192.3.1.1 192.4.1.1 Gi 13/5 v2/S 0 30 1 192.4.1.1 172.21.110.1 Gi 13/6 v2/S 0 30 1 172.21.110.1 172.21.203.1 Gi 13/7 v2/S 0 30 1 172.21.203.1 Table 38-1. show ip pim interface Command Example Fields Field Address Interface Ver/Mode Nbr Count Query Intvl Description Lists the IP addresses of the interfaces participating in PIM. List the interface type, with either slot/port information or ID (VLAN or Port Channel), of the interfaces participating in PIM. Displays the PIM version number and mode for each interface participating in PIM. • v2 = PIM version 2 • S = PIM Sparse mode Displays the number of PIM neighbors discovered over this interface. Displays the query interval for Router Query messages on that interface (configured with ip pim query-interval command). 1154 | PIM-Sparse Mode (PIM-SM)