Dell Force10 S4820T FTOS Command Reference Guide - Page 523

link-bundle-distribution trigger-threshold Provides a mechanism to set the threshold to trigger when traffic distribution will begin being monitored on an ECMP link bundle. Syntax Parameters Command Modes Command History link-bundle-distribution trigger-threshold [percent] To exit from ecmp group mode, use the exit command. percent EXEC Privilege Indicate the threshold value when traffic distribution will start being monitored on an ECMP link bundle. Range: 1 to 90% Default: 60% Version 8.3.19.0 Version 8.3.10.0 Introduced on S4820T Introduced on S4810 show config Display the ECMP configuration. Syntax Command Modes Command History Related Commands show config CONFIGURATION-ECMP-GROUP Version 8.3.19.0 Version 8.3.10.0 Introduced on S4820T Introduced on S4810 show running-config ecmp-group Display interfaces, LAG, or LAG link bundles being monitored for uneven traffic distribution show link-bundle distribution Display the link-bundle distribution for the interfaces in the bundle, type of bundle (LAG or ECMP) and the most recently calculated interface utilization (either bytes per second rate or maximum rate) for each interface. Syntax Command Modes show link-bundle-distribution EXEC Privilege Equal Cost Multi-Path | 523