Dell Force10 S4820T FTOS Command Reference Guide - Page 1383
TRACE LIST, Assign a sequence number to a deny or permit filter in a trace list while creating
View all Dell Force10 S4820T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1383 highlights
Command Modes Related Commands TRACE LIST ip trace-list permit permit tcp Configure a trace list. Assign a trace list filter to forward IP packets. Assign a trace list filter to forward TCP packets. seq e Syntax Parameters Assign a sequence number to a deny or permit filter in a trace list while creating the filter. seq sequence-number {deny | permit} {ip-protocol-number | ip | tcp | udp} {source mask | any | host ip-address} {destination mask | any | host ip-address} [operator port [port]] [precedence precedence] [tos tos-value] [count [byte] | log] To delete a filter, use the no seq sequence-number command. sequence-number deny permit ip-protocol-number ip tcp udp source mask any host ip-address operator Enter a number from 0 to 65535. Enter the keyword deny to configure a filter to drop packets meeting this condition. Enter the keyword permit to configure a filter to forward packets meeting this criteria. Enter a number from 0 to 255 to filter based on the protocol identified in the IP protocol header. Enter the keyword ip to configure a generic IP access list. The keyword ip specifies that the access list will permit all IP protocols. Enter the keyword tcp to configure a TCP access list filter. Enter the keyword udp to configure a UDP access list filter. Enter the IP address of the network or host from which the packets were sent. (OPTIONAL) Enter a network mask in /prefix format (/x). Enter the keyword any to specify that all routes are subject to the filter. Enter the keyword host followed by the IP address to specify a host IP address. (OPTIONAL) Enter one of the following logical operands: • eq = equal to • neq = not equal to • gt = greater than • lt = less than • range = inclusive range of ports (you must specify two ports for the port parameter.) Security | 1383