Dell Force10 S4820T FTOS Command Reference Guide - Page 1420

www.dell.com | support.dell.com Usage Information Example Version 7.5.1.0 Support added for C-Series E-Series legacy command The following example specifies the group named harig as a version 3 user requiring both authentication and encryption and read access limited to the read named rview. Note: For IPv6 ACLs, only IPv6 and UDP types are valid for SNMP; TCP, ICMP rules are not valid for SNMP. In IPv6 ACLs port rules are not valid for SNMP. FTOS#conf FTOS(conf)# snmp-server group harig 3 priv read rview FTOS# Note: The number of configurable groups is limited to 16 groups. Related Commands show snmp group show running-config snmp Display the group name, security model, view status, and storage type of each group. Display the SNMP running configuration snmp-server host c e s z Configure the recipient of an SNMP trap operation. Syntax snmp-server host ip-address | ipv6-address [traps | informs] [version 1 | 2c | 3] [auth | no auth | priv] [community-string] [udp-port port-number] [notification-type] To remove the SNMP host, use the no snmp-server host ip-address [traps | informs] [version 1 | 2c | 3] [auth | noauth | priv] [community-string] [udp-port number] [notification-type] command. Parameters ip-address ipv6-address traps informs Enter the keyword host followed by the IP address of the host (configurable hosts is limited to 16). Enter the keyword host followed by the IPv6 address of the host in the x:x:x:x::x format. The :: notation specifies successive hexadecimal fields of zero (OPTIONAL) Enter the keyword traps to send trap notifications to the specified host. Default: traps (OPTIONAL) Enter the keyword informs to send inform notifications to the specified host. Default: traps 1420 | Simple Network Management Protocol and Syslog