Dell Force10 S4820T FTOS Command Reference Guide - Page 1348

www.dell.com | support.dell.com Defaults Command Modes Command History Usage Information Related Commands port number timeout seconds key key (OPTIONAL) Enter the keyword port followed by a number as the port to be used by the TACACS+ server. Range: zero (0) to 65535 Default: 49 (OPTIONAL) Enter the keyword timeout followed by the number of seconds the switch waits for a reply from the TACACS+ server. Range: 0 to 1000 Default: 10 seconds (OPTIONAL) Enter the keyword key followed by a string up to 42 characters long as the authentication key. This authentication key must match the key specified in the tacacs-server key for the TACACS+ daemon. Configure this parameter last because leading spaces are ignored. Not configured. CONFIGURATION Version 8.3.19.0 Version 8.4.1.0 Version 8.3.7.0 Version 7.7.1.0 Version 7.6.1.0 Version 7.5.1.0 pre-Version 6.2.1.1 Introduced on S4820T Added support for IPv6 Introduced on S4810 Authentication key length increased to 42 characters Introduced for S-Series Introduced for C-Series Introduced on E-Series To list multiple TACACS+ servers to be used by the aaa authentication login command, configure this command multiple times. If you are not configuring the switch as a TACACS+ server, you do not need to configure the port, timeout and key optional parameters. If you do not configure a key, the key assigned in the tacacs-server key command is used. aaa authentication login Specify the login authentication method. tacacs-server key Configure a TACACS+ key for the TACACS server. tacacs-server key c e s Configure a key for communication between a TACACS+ server and client. Syntax 1348 | Security tacacs-server key [encryption-type] key To delete a key, use the no tacacs-server key key