Dell Force10 S4820T FTOS Command Reference Guide - Page 404

www.dell.com | support.dell.com Syntax Parameters Defaults Command Modes Command History neighbor {ip-address | peer-group-name} default-originate [route-map map-name] To remove a default route, use the no neighbor {ip-address | peer-group-name} default-originate command. ip-address peer-group-name route-map map-name Enter the IP address of the neighbor in dotted decimal format. Enter the name of the peer group to set the default route of all routers in that peer group. (OPTIONAL) Enter the keyword route-map followed by the name of a configured route map. Not configured. ROUTER BGP Address Family (conf-router_bgp_af) Version 7.8.1.0 Version 7.7.1.0 Version 7.6.1.0 Introduced support on S-Series Introduced support on C-Series Introduced IPv6 MGBP support for E-Series neighbor distribute-list c et s Distribute BGP information via an established prefix list. Syntax neighbor [ip-address | peer-group-name] distribute-list prefix-list-name [in | out] To delete a neighbor distribution list, use the no neighbor [ip-address | peer-group-name] distribute-list prefix-list-name [in | out] command. Parameters ip-address peer-group-name prefix-list-name in out Enter the IP address of the neighbor in dotted decimal format. Enter the name of the peer group to apply the distribute list filter to all routers in the peer group. Enter the name of an established prefix list. If the prefix list is not configured, the default is permit (to allow all routes). Enter the keyword in to distribute only inbound traffic. Enter the keyword out to distribute only outbound traffic. Defaults Not configured. Command Modes ROUTER BGP Address Family (conf-router_bgp_af) Usage Information Other BGP filtering commands include: neighbor filter-list, ip as-path access-list, and neighbor route-map. 404 | Border Gateway Protocol IPv4 (BGPv4)