Dell Force10 S4820T FTOS Command Reference Guide - Page 639

Parameters interface summary detail (Optional) Enter one of the following keywords and slot/port or number information: • For a 1-Gigabit Ethernet interface, enter the keyword GigabitEthernet followed by the slot/port information. • For a Port Channel interface, enter the keyword port-channel followed by a number: C-Series and S-Series Range: 1-128 E-Series Range: 1 to 32 for EtherScale, 1 to 255 for TeraScale and 1 to 512 for ExaScale. • For a SONET interface, enter the keyword sonet followed by the slot/port information. • For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet followed by the slot/port information. • For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE followed by the slot/port information. (OPTIONAL) Enter the keyword summary to display the current summary of dampening data, including the number of interfaces configured and the number of interfaces suppressed, if any. (OPTIONAL) Enter the keyword detail to display detailed interface dampening data. Defaults No default values or behavior. Command Modes EXEC Command History Version 8.5.1.0 Version 8.1.1.0 Version 7.6.1.0 Version 7.5.1.0 Version 7.4.1.0 Added support for 4-port 40G line cards on ExaScale. Introduced on E-Series ExaScale Introduced on S-Series Introduced on C-Series Introduced Example Related Commands FTOS#show interfaces dampening Interface Max-Sup Supp Flaps Penalty State Gi 3/2 Up 0 0 Gi 3/10 Up 0 0 FTOS# Half-Life Reuse Suppress 20 800 4500 120 5 750 2500 20 dampening show interfaces show interfaces configured Configure dampening on an interface Display information on a specific physical interface or virtual interface. Display any interface with a non-default configuration. show interfaces debounce e Display information on interfaces with debounce timer configured. Syntax show interfaces debounce interface Interfaces | 639