Dell Force10 S4820T FTOS Command Reference Guide - Page 1287
Display the routes learned by RIP. If the switch learned no RIP routes, no output is, generated.
View all Dell Force10 S4820T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1287 highlights
Example Version 7.8.1.0 Version 7.6.1.0 pre-Version 6.2.1.1 Introduced on S-Series Introduced on C-Series Introduced on E-Series FTOS(conf-router_rip)#show config ! router rip network 172.31.0.0 passive-interface GigabitEthernet 0/1 FTOS(conf-router_rip)# show ip rip database c e s Display the routes learned by RIP. If the switch learned no RIP routes, no output is generated. Syntax Parameters Command Modes Command History Example show ip rip database [ip-address mask] ip-address mask (OPTIONAL) Specify an IP address in dotted decimal format to view RIP information on that network only. If you enter an IP address, you must also enter a mask for that IP address. (OPTIONAL) Specify a mask, in /network format, for the IP address. EXEC Privilege Version 8.3.19.0 Version 8.3.7.0 Version 7.8.1.0 Version 7.6.1.0 pre-Version 6.2.1.1 Introduced on S4820T Introduced on S4810 Introduced on S-Series Introduced on C-Series Introduced on E-Series FTOS#show ip rip database Total number of routes in RIP database: 1624 204.250.54.0/24 [50/1] via 192.14.1.3, 00:00:12, GigabitEthernet 9/15 204.250.54.0/24 auto-summary 203.250.49.0/24 [50/1] via 192.13.1.3, 00:00:12, GigabitEthernet 9/14 203.250.49.0/24 auto-summary 210.250.40.0/24 [50/2] via 1.1.18.2, 00:00:14, Vlan 18 [50/2] via 1.1.130.2, 00:00:12, Port-channel 30 210.250.40.0/24 auto-summary 207.250.53.0/24 [50/2] via 1.1.120.2, 00:00:55, Port-channel 20 [50/2] via 1.1.130.2, 00:00:12, Port-channel 30 [50/2] via 1.1.10.2, 00:00:18, Vlan 10 207.250.53.0/24 auto-summary 208.250.42.0/24 [50/2] via 1.1.120.2, 00:00:55, Port-channel 20 [50/2] via 1.1.130.2, 00:00:12, Port-channel 30 Routing Information Protocol (RIP) | 1287