Dell Force10 S4820T FTOS Command Reference Guide - Page 1082

www.dell.com | support.dell.com clear ip ospf c e s Clear all OSPF routing tables. Syntax clear ip ospf process-id [process] Parameters process-id process Enter the OSPF Process ID to clear a specific process. If no Process ID is entered, all OSPF processes are cleared. (OPTIONAL) Enter the keyword process to reset the OSPF process. Command Modes EXEC Privilege Command History Version 8.3.19.0 Version 8.3.7.0 Version 7.8.1.0 Version 7.6.1.0 Version 7.5.1.0 pre-Version 6.1.1.1 Introduced on S4820T Introduced on S4810 Introduced support for Multi-Process OSPF. Introduced on S-Series Introduced on C-Series Introduced on E-Series clear ip ospf statistics c e s Clear the packet statistics in interfaces and neighbors. Syntax clear ip ospf process-id statistics [interface name {neighbor router-id}] Parameters process-id interface name neighbor router-id Enter the OSPF Process ID to clear statistics for a specific process. If no Process ID is entered, all OSPF processes are cleared. (OPTIONAL) Enter the keyword interface followed by one of the following interface keywords and slot/port or number information: • For a 1-Gigabit Ethernet interface, enter the keyword GigabitEthernet followed by the slot/port information. • For Port Channel groups, enter the keyword port-channel followed by a number: • C-Series and S-Series Range: 1-128 • E-Series Range: 1-32 for EtherScale, 1-255 for TeraScale • For a SONET interface, enter the keyword sonet followed by the slot/port information. • For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet followed by the slot/port information. • For a VLAN, enter the keyword vlan followed by a number from 1 to 4094. • For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE followed by the slot/port information. (OPTIONAL) Enter the keyword neighbor followed by the neighbor's router-id in dotted decimal format (A.B.C.D.). Defaults No defaults values or behavior 1082 | Open Shortest Path First (OSPFv2)