Dell Force10 S4820T FTOS Command Reference Guide - Page 567
redundancy auto-failover-limit
View all Dell Force10 S4820T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 567 highlights
Parameters Defaults Command Modes Command History Related Commands process count number period minutes Configure a process to be restartable. Enter the number of times a process can restart within the configured period. Range: 1-3 Default: 3 Enter the amount of time within which the process can restart count times. Range: 1-60 minutes Default: 60 minutes By default, a process can be restarted a maximum of 3 times within 1 hour. On the exception that exceeds this limit, the system reloads or fails over. CONFIGURATION Version 8.3.19.0 Version 8.3.12.0 Version 8.4.1.0 Introduced on the S4820T. Introduced on the S4810. Introduced on E-Series. show processes restartable redundancy auto-failover-limit c e Specify an auto-failover limit for RPMs. When an non-recoverable fatal error is detected, an automatic RPM failover occurs. This command does not affect user-initiated (manual) failovers. Syntax redundancy auto-failover-limit [count number [period minutes] | period minutes]] To disable the auto-failover limit control, enter no redundancy auto-failover-limit. Parameters count number period minutes] Enter the number of times the RPMs can automatically failover within the period defined in the period parameter. Range: 2 to 10 Default: 3 Enter a duration in which to allow a number of automatic failovers (limited to the number defined in the count parameter). Range: 5 to 9000 minutes Default: 60 minutes Defaults Count: 3 Period: 60 minutes Command Modes CONFIGURATION Command History Version 8.1.1.0 Version 7.5.1.0 Version 7.6.1.0 Introduced on E-Series ExaScale Introduced on C-Series Introduced on E-Series High Availability (HA) | 567