Dell Force10 S4820T FTOS Command Reference Guide - Page 345

Related Commands Command History ip as-path access-list Enter AS-PATH ACL mode and configure AS-PATH filters. Version 8.3.19.0 Version 8.3.7.0 Version 7.8.1.0 Version 7.7.1.0 Introduced on the S4820T. Introduced on the S4810. Introduced support on S-Series Increased name string to accept up to 140 characters. Prior to 7.8.1.0, ACL names are up to 16 characters long. Introduced support on C-Series neighbor graceful-restart c e s Enable graceful restart on a BGP neighbor. Syntax Parameters Defaults Command Modes Usage Information Command History neighbor {ip-address | peer-group-name} graceful-restart [restart-time seconds] [stale-path-time seconds] [role receiver-only] To return to the default, enter the no bgp graceful-restart command. ip-address peer-group-name restart-time seconds stale-path-time seconds role receiver-only Enter the IP address of the neighbor in dotted decimal format. Enter the name of the peer group to apply the filter to all routers in the peer group. Enter the keyword restart-time followed by the maximum number of seconds needed to restart and bring-up all the peers. Range: 1 to 3600 seconds Default: 120 seconds Enter the keyword stale-path-time followed by the maximum number of seconds to wait before restarting a peer's stale paths. Default: 360 seconds. Enter the keyword role receiver-only to designate the local router to support graceful restart as a receiver only. as above ROUTER BGP This feature is advertised to BGP neighbors through a capability advertisement. In receiver only mode, BGP saves the advertised routes of peers that support this capability when they restart. Version 8.3.19.0 Version 8.3.7.0 Version 7.8.1.0 Version 7.7.1.0 Introduced on the S4820T. Introduced on the S4810. Introduced support on S-Series Introduced support on C-Series Border Gateway Protocol IPv4 (BGPv4) | 345