Dell Force10 S4820T FTOS Command Reference Guide - Page 1190

www.dell.com | support.dell.com Example (show vlan private-vlan interface) Example (primary) Example (secondary) FTOS# show vlan private-vlan interface Gi 2/1 Primary Secondary Type Active Ports 10 primary Yes Gi 2/1 If the VLAN ID is that of a primary VLAN, then the entire private VLAN output will be displayed, as shown in the first figure below. If the VLAN ID is a secondary VLAN, only its primary VLAN and its particular secondary VLAN properties will be displayed, as shown in the second figure below. FTOS# show vlan private-vlan 10 Primary Secondary Type Active Ports 10 primary Yes Gi 2/1,3 1020 isolated Yes Gi 0/4 101 community Yes Gi 2/7-10 FTOS#show vlan private-vlan 102 Primary Secondary Type Active Ports 10 Primary Yes Po 1 Gi 0/2 102 Isolated Yeso Gi 0/4 The table, below, defines the fields in the output, above. Table 40-2. show interfaces description Command Example Fields Field Primary Secondary Type Active Ports Description Displays the VLAN ID of the designated or associated primary VLAN(s) Displays the VLAN ID of the designated or associated secondary VLAN(s Displays the type of VLAN in which the listed interfaces reside States whether the interface is operationally up or down Displays the interface IDs in the listed VLAN. Related Commands private-vlan mode show interfaces private-vlan show vlan private-vlan mapping switchport mode private-vlan Set the mode of the selected VLAN to either community or isolated. Display type and status of PVLAN interfaces. Display primary-secondary VLAN mapping. Set the PVLAN mode of the selected port. show vlan private-vlan mapping c s Display primary-secondary VLAN mapping. 1190 | Private VLAN (PVLAN)