Dell Force10 S4820T FTOS Command Reference Guide - Page 1238

www.dell.com | support.dell.com Syntax service-class dot1p-mapping {dot1p0 value | dot1p1 value | dot1p2 value | dot1p3 value | dot1p4 value | dot1p5value | dot1p6 | dot1p7 value} Parameters dot1p0 value ... dot1p7 value Enter a dot1p list number and value List number Range: 0 to 7 Range: 0 to 33 Command Mode INTERFACE service-policy input c e s Apply an input policy map to the selected interface. Syntax service-policy input policy-map-name [layer2] To remove the input policy map from the interface, use the no service-policy input policy-map-name [layer2] command. Parameters policy-map-name layer2 Enter the name for the policy map in character format (16 characters maximum). You can identify an existing policy map or name one that does not yet exist. (OPTIONAL) Enter the keyword layer2 to specify a Layer 2 Class Map. Default: Layer 3 Defaults Layer 3 Command Modes INTERFACE Command History Version 8.3.19.0 Version 8.3.7.0 Version 7.6.1.0 Version 7.5.1.0 Version 7.4.1.0 pre-Version 6.1.1.1 Introduced on S4820T Introduced on S4810 Introduced on S-Series Introduced on C-Series E-Series Only: Expanded to add support for Layer 2 Introduced on E-Series Usage A single policy-map can be attached to one or more interfaces to specify the service-policy Information for those interfaces. A policy map attached to an interface can be modified. Note: The service-policy commands are not allowed on a port channel. The service-policy input policy-map-name command and the service-class dynamic dot1p command are not allowed simultaneously on an interface. However, the service-policy input command (without the policy-map-name option) and the service-class dynamic dot1p command are allowed on an interface. 1238 | Quality of Service (QoS)