Dell Force10 S4820T FTOS Command Reference Guide - Page 918

www.dell.com | support.dell.com Parameters seconds Range: 5-300 seconds Default: 30 seconds Defaults 30 seconds Command Modes ROUTER ISIS Command History Version 8.3.19.0 Version 8.3.12.0 Version 8.3.1.0 Introduced on S4820T Introduced on S4810 Introduced on the E-Series Related Commands graceful-restart t3 Configure the overall wait time before Graceful Restart is completed. hello padding e Use to turn ON or OFF padding for LAN and point-to-point hello PDUs or to selectively turn padding ON or OFF for LAN or point-to-point hello PDUs. Syntax hello padding [multi-point | point-to-point] To return to default, use no hello padding [multi-point | point-to-point]. Parameters multi-point point-to-point (OPTIONAL) Enter the keyword multi-point to pad only LAN hello PDUs. (OPTIONAL) Enter the keyword point-to-point to pad only point-to-point PDUs. Defaults Both LAN and point-to-point hello PDUs are padded. Command Modes ROUTER ISIS Command History Version 8.3.19.0 Version 8.3.12.0 Introduced on S4820T Introduced on S4810 Usage Information IS-IS hellos are padded to the full maximum transmission unit (MTU) size. Padding IS-IS Hellos (IIHS) to the full MTU provides early error detection of large frame transmission problems or mismatched MTUs on adjacent interfaces. Related Commands isis hello padding Turn ON or OFF hello padding on an interface basis. hostname dynamic e Enables dynamic learning of hostnames from routers in the domain and allows the routers to advertise the hostname in LSPs. 918 | Intermediate System to Intermediate System (IS-IS)