Dell Force10 S4820T FTOS Command Reference Guide - Page 562

www.dell.com | support.dell.com show gvrp statistics c e s Display the GVRP configuration statistics. Syntax show gvrp statistics {interface interface | summary} Parameters interface interface summary Enter the keyword interface followed by one of the interface keywords and slot/port or number information: • For a Fast Ethernet interface, enter the keyword FastEthernet followed by the slot/port information. • For a 1-Gigabit Ethernet interface, enter the keyword GigabitEthernet followed by the slot/port information. • For a Port Channel interface, enter the keyword port-channel followed by a number: C-Series and S-Series Range: 1-128 E-Series Range: 1 to 32 for EtherScale, 1 to 255 for TeraScale and 1 to 512 for ExaScale. • For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet followed by the slot/port information. • For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE followed by the slot/port information. Enter the keyword summary to display just a summary of the GVRP statistics. Defaults No default values or behavior Command Modes EXEC EXEC Privilege Command History Example Usage Information Version 7.6.1.0 Introduced on C, E, and S-Series FTOS#show gvrp statistics int gi 1/0 Join Empty Received: 0 Join In Received: 0 Empty Received: 0 LeaveIn Received: 0 Leave Empty Received: 0 Leave All Received: 40 Join Empty Transmitted: 156 Join In Transmitted: 0 Empty Transmitted: 0 Leave In Transmitted: 0 Leave Empty Transmitted: 0 Leave All Transmitted: 41 Invalid Messages/Attributes skipped: 0 Failed Registrations: 0 FTOS# Invalid messages/attributes skipped can occur in the following cases: • The incoming GVRP PDU has an incorrect length. • "End of PDU" was reached before the complete attribute could be parsed. 562 | GARP VLAN Registration (GVRP)