Dell Force10 S4820T FTOS Command Reference Guide - Page 976

www.dell.com | support.dell.com Example FTOS#show mac-address-table VlanId Mac Address Type Interface 999 00:00:00:00:00:19 Sticky Gi 0/1 999 00:00:00:00:00:29 Dynamic Gi 0/2 FTOS# State Active Active Table 31-1. show mac-address-table Information Column Heading Description VlanId Displays the VLAN ID number. Mac Address Type Interface State Displays the MAC address in nn:nn:nn:nn:nn:nn format. Lists whether the MAC address was manually configured (Static), learned dynamically (Dynamic), or associated with a specific port (Sticky). Displays the interface type and slot/port information. The following abbreviations describe the interface types: • gi - Gigabit Ethernet followed by a slot/port. • po - Port Channel followed by a number. Range: 1 to 255 for TeraScale • so - Sonet followed by a slot/port. • te - 10-Gigabit Ethernet followed by a slot/port. Lists if the MAC address is in use (Active) or not in use (Inactive). Example (show mac-address-table count) FTOS# show mac-address-table count MAC Entries for all vlans : Dynamic Address Count : 110 Static Address (User-defined) Count : 0 Sticky Address Count : 0 Total Synced Mac from Peer(N): 100 Total MAC Addresses in Use: 110 FTOS# Table 31-2. show mac-address-table count Information Line Beginning with MAC Entries... Dynamic Address... Static Address... Total MAC... Description Displays the number of MAC entries learnt per VLAN. Lists the number of dynamically learned MAC addresses. Lists the number of user-defined MAC addresses. Lists the total number of MAC addresses used by the switch. Related Commands show mac-address-table aging-time Display MAC aging time. 976 | Layer 2