Dell Force10 S4820T FTOS Command Reference Guide - Page 590

www.dell.com | support.dell.com Example (VLT Port Channel Down) Note: The asterisk (*) after the port channel number (Po 2) highlighted in the example below indicates the port channel is VLT, that the local VLT port channel is down and the remote VLT port is up. FTOS#show ip igmp groups Total Number of Groups: 5 IGMP Connected Group Membership Group Address Interface 225.0.0.0 Vlan 100 Member Ports: Po 2* 225.0.0.1 Vlan 100 Member Ports: Po 2* 225.0.0.2 Vlan 100 Member Ports: Po 2* 225.0.0.3 Vlan 100 Member Ports: Po 2* 225.0.0.4 Vlan 100 Member Ports: Po 2* Mode IGMPv2 IGMPv2 IGMPv2 IGMPv2 IGMPv2 Uptime Expires Last Reporter 00:00:05 00:02:04 3.0.0.51 00:00:05 00:02:04 3.0.0.51 00:00:05 00:02:04 3.0.0.51 00:00:05 00:02:04 3.0.0.51 00:00:05 00:02:04 3.0.0.51 Table 22-1. show ip igmp groups Command Example Fields Field Group Address Interface Mode Uptime Expires Last Reporter Member Ports Description Lists the multicast address for the IGMP group. Lists the interface type, slot and port number. Displays the IGMP version used. Displays the amount of time the group has been operational. Displays the amount of time until the entry expires. Displays the IP address of the last host to be a member of the IGMP group. Indicates the port channel. If the port channel is VLT, an asterisk (*) after the port channel number indicates the port channel is locally down and that a remote VLT port is up. show ip igmp interface c e s View information on the interfaces participating in IGMP. Syntax show ip igmp interface [interface] 590 | Internet Group Management Protocol (IGMP)