Dell Force10 S4820T FTOS Command Reference Guide - Page 763

Example FTOS#show ipv6 accounting access-list ! Ingress IPv6 access list AclList1 on GigabitEthernet 9/0 Total cam count 15 seq 10 permit icmp host 3333:: any mobile-advertisement log seq 15 deny tcp any any rst seq 20 permit udp any any gt 101 count (0 packets) ! FTOS# Table 25-2. show ip accounting access-lists Command Example Field Field "Ingress IPv6..." "seq 10..." Description Displays the name of the IPv6 ACL, in this example "AclList1". Displays the filter. If the keywords count or byte were configured in the filter, the number of packets or bytes processed by the filter is displayed at the end of the line. show running-config acl c e s Display the ACL running configuration. Syntax Command Modes show running-config acl EXEC EXEC Privilege Command History Version 8.4.2.1 Version 8.2.1.0 Version 7.8.1.0 Version 7.4.1.0 Introduced on the S-Series Introduced on the E-Series ExaScale Introduced on the C-Series Introduced support on the E-Series TeraScale Example FTOS#show running-config acl ! ip access-list extended ext-acl1 ! ip access-list standard std-acl1 ! ipv6 access-list Acl1 description IPV6 Access-list seq 5 permit ipv6 1111::2222/127 host 3333::1111 log count bytes remark 10 Remark for Entry # 10 seq 10 permit icmp host 3333:: any mobile-advertisement log seq 15 deny tcp any any rst seq 20 permit udp any any gt 100 count !FTOS# test cam-usage c e s Verify that enough ACL CAM space is available for the IPv6 ACLs you have created. IPv6 Access Control Lists (IPv6 ACLs) | 763