Dell Force10 S4820T FTOS Command Reference Guide - Page 1118

www.dell.com | support.dell.com Checksum: 0x4309 Length: 36 Network Mask: /24 Attached Router: 192.10.10.2 Attached Router: 20.20.20.1 Attached Router: 20.20.20.5 FTOS# Table 37-6. Command Example Descriptions: show ip ospf process-id database network Item Description LS Age Options Displays the LSA age. Displays the optional capabilities available on router. The following options can be found in this item: • TOS-capability or No TOS-capability is displayed depending on whether the router can support Type of Service. • DC or No DC is displayed depending on whether the originating router can support OSPF over demand circuits. • E or No E is displayed on whether the originating router can accept AS External LSAs. LS Type Displays the LSA's type. Link State ID Advertising Router Checksum Length Displays the Link State ID. Identifies the router ID of the LSA's originating router. Identifies the link state sequence number. This number enables you to identify old or duplicate LSAs. Displays the Fletcher checksum of an LSA's complete contents. Network Mask Displays the length in bytes of the LSA. Attached Router Identifies the IP address of routers attached to the network. Related Commands show ip ospf database Displays OSPF database information. show ip ospf database nssa-external c e s Display NSSA-External (type 7) LSA information. Syntax show ip ospf database nssa-external [link-state-id] [adv-router ip-address] Parameters link-state-id adv-router ip-address (OPTIONAL) Specify LSA ID in dotted decimal format. The LSA ID value depends on the LSA type, and it can be one of the following: • the network's IP address for Type 3 LSAs or Type 5 LSAs • the router's OSPF router ID for Type 1 LSAs or Type 4 LSAs • the default destination (0.0.0.0) for Type 5 LSAs (OPTIONAL) Enter the keywords adv-router ip-address to display only the LSA information about that router. Command Modes EXEC 1118 | Open Shortest Path First (OSPFv2)