Dell Force10 S4820T FTOS Command Reference Guide - Page 628
portmode hybrid, Table 23-4., Auto-negotiation and Link Speed Combinations, Port 0
View all Dell Force10 S4820T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 628 highlights
www.dell.com | support.dell.com Table 23-4. Auto-negotiation and Link Speed Combinations Port 0 Port 1 Link Status between Port 1 and Port 2 auto-negotiation enabled* speed 1000 or auto auto-negotiation enabled* speed 1000 or auto Up at 1000 Mb/s auto-negotiation enabled speed 100 auto-negotiation enabled speed 100 Up at 100 Mb/s auto-negotiation disabled speed 100 auto-negotiation disabled speed 100 Up at 100 Mb/s auto-negotiation disabled speed 100 auto-negotiation enabled speed 100 Down auto-negotiation enabled* speed 1000 or auto auto-negotiation disabled speed 100 Down * You cannot disable auto-negotiation when the speed is set to 1000 or auto. Related Commands speed (for 10/100/1000 interfaces) Set the link speed to 10, 100, 1000 or auto-negotiate the speed. portmode hybrid c e s Set a physical port or port-channel to accept both tagged and untagged frames. A port configured this way is identified as a hybrid port in report displays. Syntax portmode hybrid To return a port to accept either tagged or untagged frames (non-hybrid), use the no portmode hybrid command. Defaults non-hybrid Command Modes INTERFACE (conf-if-interface-slot/port) Command History Version 8.3.19.0 Version 8.3.7.0 Version 8.1.1.0 Version 7.6.1.0 Version 7.5.1.0 Introduced on S4820T Introduced on S4810 Introduced on E-Series ExaScale Introduced on E-Series and S-Series Introduced on C-Series only Example FTOS(conf)#interface gi 7/0 FTOS(conf-if-gi-7/0)#portmode hybrid FTOS(conf-if-gi-7/0)#interface vlan 10 FTOS(conf-if-vl-10)#untagged gi 7/0 FTOS(conf-if-vl-10)#interface vlan 20 FTOS(conf-if-vl-20)#tagged gi 7/0 628 | Interfaces