Dell Force10 S4820T FTOS Command Reference Guide - Page 1295

Version 7.6.1.0 Version 7.5.1.0 Version 6.1.1.0 Support added for S-Series Support added for C-Series Introduced for E-Series rmon event c e s z Add an event in the RMON event table. Syntax Parameters Defaults Command Modes Command History rmon event number [log] [trap community] [description string] [owner name] To disable RMON on an interface, use the no rmon event number [log] [trap community] [description string] command. number log trap community description string owner name Assign an event number in integer format from 1 to 65535. The number value must be unique in the RMON Event Table. (OPTIONAL) Enter the keyword log to generate an RMON log entry. The log entry is triggered and sets the eventType in the RMON MIB to log or log-and-trap. Default: No log (OPTIONAL) Enter the keyword trap followed by an SNMP community string to configure the eventType setting in the RMON MIB. This sets either snmp-trap or log-and-trap. Default: public (OPTIONAL) Enter the keyword description followed by a string describing the event. (OPTIONAL) Enter the keyword owner followed by the name of the owner of this event. as described above CONFIGURATION Version 8.3.19.0 Version 8.3.11.1 Version 8.3.7.0 Version 7.6.1.0 Version 7.5.1.0 Version 6.1.1.0 Introduced on S4820T Introduced on Z9000 Introduced on S4810 Support added for S-Series Support added for C-Series Introduced for E-Series Remote Monitoring (RMON) | 1295