Dell Force10 S4820T FTOS Command Reference Guide - Page 1487
ntp trusted-key
View all Dell Force10 S4820T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1487 highlights
Syntax Parameters Defaults Command Modes Command History ntp source interface To delete the configuration, enter no ntp source. interface Enter the following keywords and slot/port or number information: • For an 100/1000 Ethernet interface, enter the keyword GigabitEthernet followed by the slot/port information. • For a 1-Gigabit Ethernet interface, enter the keyword GigabitEthernet followed by the slot/port information. • For Loopback interfaces, enter the keyword loopback followed by a number from zero (0) to 16383. • For a Port Channel interface, enter the keyword lag followed by a number: C-Series and S-Series Range: 1-128 E-Series Range: 1 to 32 for EtherScale, 1to 255 for TeraScale • For SONET interface types, enter the keyword sonet followed by the slot/port information. • For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet followed by the slot/port information. • For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE followed by the slot/port information. • For VLAN interface, enter the keyword vlan followed by a number from 1 to 4094. Not configured. CONFIGURATION Version 8.5.1.0 Version 7.6.1.0 Version 7.5.1.0 pre-Version 6.1.1.0 Added support for 4-port 40G line cards on ExaScale. Support added for S-Series Support added for C-Series Introduced for E-Series ntp trusted-key c e s Set a key to authenticate the system to which NTP will synchronize. Syntax ntp trusted-key number To delete the key, use the no ntp trusted-key number command. Parameters number Enter a number as the trusted key ID. Range: 1 to 4294967295. Defaults Not configured. Command Modes CONFIGURATION System Time and Date | 1487