Dell Force10 S4820T FTOS Command Reference Guide - Page 1241
show cam layer2-qos, C-Series and S-Series, E-Series
View all Dell Force10 S4820T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1241 highlights
Defaults No default behavior or values Command Modes CONFIGURATION (conf-qos-policy-in) Command History Version 8.3.19.0 Version 8.3.7.0 Version 8.2.1.0 Version 7.6.1.0 Version 7.5.1.0 Version 7.4.1.0 pre-Version 6.1.1.1 Introduced on S4820T Introduced on S4810 mac-dot1p available on the C-Series and S-Series Introduced on S-Series Introduced on C-Series E-Series Only: Expanded to add support for mac-dot1p Introduced on E-Series Usage Information C-Series and S-Series Once the IP DSCP bit is set, other QoS services can then operate on the bit settings. E-Series Once the IP DSCP bit is set, other QoS services can then operate on the bit settings. WRED (Weighted Random Early Detection) ensures that high-precedence traffic has lower loss rates than other traffic during times of congestion. show cam layer2-qos e Display the Layer 2 QoS CAM entries. Syntax show cam layer2-qos {[linecard number port-set number] | [interface interface]} [summary] Parameters linecard number port-set number interface interface summary Enter the keyword linecard followed by the line card slot number. E-Series Range: 0 to 13 on a E1200, 0 to 6 on a E600/E600i, and 0 to 5 on a E300. Enter the keyword port-set followed by the line card's port pipe. Range: 0 or 1 Enter the keyword interface followed by one of the keywords below and slot/port or number information: • For a Fast Ethernet interface, enter the keyword FastEthernet followed by the slot/port information. • For a Gigabit Ethernet interface, enter the keyword GigabitEthernet followed by the slot/port information. • For a SONET interface, enter the keyword sonet followed by the slot/port information. • For a Ten Gigabit Ethernet interface, enter the keyword TenGigabitEthernet followed by the slot/port information. (OPTIONAL) Enter the keyword summary to display only the total number of CAM entries. Defaults No default behavior or values Quality of Service (QoS) | 1241