Dell Force10 S4820T FTOS Command Reference Guide - Page 340

www.dell.com | support.dell.com Parameters Defaults Command Modes Command History ip-address seconds Enter the IP address of the neighbor in dotted decimal format. Enter a number as the time interval, in seconds, before BGP route updates are sent. Range: 0 to 3600 seconds. none ROUTER BGP Version 8.3.19.0 Version 8.3.7.0 Version 7.8.1.0 Version 7.7.1.0 Introduced on the S4820T. Introduced on the S4810. Introduced support on S-Series Introduced support on C-Series neighbor allowas-in c e s Set the number of times an AS number can occur in the AS path Syntax Parameters Defaults Command Modes Related Commands Command History neighbor {ip-address | peer-group-name} allowas-in number To return to the default value, use the no neighbor {ip-address | peer-group-name} allowas-in command. ip-address peer-group-name number Enter the IP address of the neighbor in dotted decimal format. Enter the name of the peer group to set the advertisement interval for all routers in the peer group. Enter a number of times to allow this neighbor ID to use the AS path. Range: 1 to 10. Not configured. ROUTER BGP bgp four-octet-as-support Enable 4-Byte support for the BGP process. Version 8.3.19.0 Version 8.3.7.0 Version 7.8.1.0 Version 7.7.1.0 Introduced on the S4820T. Introduced on the S4810. Introduced support on S-Series Introduced on C-Series and E-Series 340 | Border Gateway Protocol IPv4 (BGPv4)