Dell Force10 S4820T FTOS Command Reference Guide - Page 1105

• All previously marked passive interfaces are removed. • May update ABR status. redistribute c e s Redistribute information from another routing protocol throughout the OSPF process. Syntax redistribute {connected | rip | static} [metric metric-value | metric-type type-value] [route-map map-name] [tag tag-value] To disable redistribution, use the no redistribute {connected | isis | rip | static} command. Parameters connected rip static metric metric-value metric-type type-value route-map map-name tag tag-value Enter the keyword connected to specify that information from active routes on interfaces is redistributed. Enter the keyword rip to specify that RIP routing information is redistributed. Enter the keyword static to specify that information from static routes is redistributed. (OPTIONAL) Enter the keyword metric followed by a number. Range: 0 (zero) to 16777214. (OPTIONAL) Enter the keyword metric-type followed by one of the following: • 1 = OSPF External type 1 • 2 = OSPF External type 2 (OPTIONAL) Enter the keyword route-map followed by the name of the route map. (OPTIONAL) Enter the keyword tag followed by a number. Range: 0 to 4294967295 Defaults Not configured. Command Modes ROUTER OSPF Command History Usage Information Version 8.3.19.0 Version 8.3.7.0 Version 7.8.1.0 Version 7.6.1.0 Version 7.5.1.0 pre-Version 6.1.1.1 Introduced on S4820T Introduced on S4810 Introduced support for Multi-Process OSPF. Introduced on S-Series Introduced on C-Series Introduced on E-Series To redistribute the default route (0.0.0.0/0), configure the default-information originate command. Open Shortest Path First (OSPFv2) | 1105