Dell Force10 S4820T FTOS Command Reference Guide - Page 448

www.dell.com | support.dell.com Example (C-Series) The following examples show some sample output when using the test cam-usage command. FTOS#test cam-usage service-policy input LauraMapTest linecard all Linecard | Portpipe | CAM Partition | Available CAM | Estimated CAM per Port | Status 2 | 1 | IPv4Flow | 232 | 0 | Allowed 2 | 1 | IPv6Flow | 0 | 0 | Allowed 4 | 0 | IPv4Flow | 232 | 0 | Allowed 4 | 0 | IPv6Flow | 0 | 0 | Allowed FTOS# FTOS#test cam-usage service-policy input LauraMapTest linecard 4 port-set 0 Linecard | Portpipe | CAM Partition | Available CAM | Estimated CAM per Port | Status 4 | 0 | IPv4Flow | 232 | 0 | Allowed 4 | 0 | IPv6Flow | 0 | 0 | Allowed FTOS# FTOS#test cam-usage service-policy input LauraMapTest linecard 2 port-set 1 Linecard | Portpipe | CAM Partition | Available CAM | Estimated CAM per Port | Status 2 | 1 | IPv4Flow | 232 | 0 | Allowed 2 | 1 | IPv6Flow | 0 | 0 | Allowed FTOS# Table 11-1. Output Explanations: test cam-usage (C-Series) Term Linecard Portpipe CAM Partition Available CAM Estimated CAM per Port Status Explanation Lists the line card or linecards that are checked. Entering all shows the status for linecards in the chassis Lists the portpipe (port-set) or port pipes (port-sets) that are checked. Entering all shows the status for linecards and port-pipes in the chassis. Shows the CAM profile of the CAM Identifies the amount of CAM space remaining for that profile Estimates the amount of CAM space the listed policy will require. Indicates whether or not the policy will be allowed in the CAM Example (S-Series) FTOS#test cam-usage service-policy input LauraIn stack-unit all Stack-Unit | Portpipe | CAM Partition | Available CAM | Estimated CAM per Port | Status 0 | 0 | IPv4Flow | 102 | 0 | Allowed 0 | 1 | IPv4Flow | 102 | 0 | Allowed FTOS# ! FTOS#test cam-usage service-policy input LauraIn stack-unit 0 port-set 1 448 | Content Addressable Memory (CAM)