Dell Force10 S4820T FTOS Command Reference Guide - Page 571

redundancy reset-counter e Reset failover counter and timestamp information displayed in the show redundancy command output. Syntax Defaults Command Modes Command History redundancy reset-counter Not configured EXEC Privilege Version 8.3.19.0 Version 8.3.12.0 Version 8.1.1.0 Version 7.6.1.0 Introduced on the S4820T. Introduced on the S4810. Introduced on E-Series ExaScale Introduced on E-Series redundancy sfm standby c Place the SFM in an offline state. Syntax Defaults Command Modes redundancy sfm standby Place the SFM in an online state using the command no redundancy sfm standby command. The SFM is online by default. CONFIGURATION Command History Usage Information Example Version 7.5.1.0 Introduced on C-Series Only When a secondary RPM with logical SFM is inserted or removed, the system must add or remove the backplane links to the switch fabric trunk. To avoid traffic disruption, use this command when the secondary RPM is inserted. When this command is executed, the logical SFM on the standby RPM is immediately taken offline and the SFM state is set as "standby". Note: This command could affect traffic when taking the secondary SFM offline. FTOS#show sfm all Switch Fabric State: up -- Switch Fabric Modules -Slot Status High Availability (HA) | 571