Dell Force10 S4820T FTOS Command Reference Guide - Page 1132

www.dell.com | support.dell.com Table 37-13. Error Definitions: show ip ospf statistics process-id global Error Type Description MD5-Error Cksum-Err Version MD5 error Checksum Error Version mismatch AreaMismatch Area mismatch Conf-Issue The received hello packet has a different hello or dead interval than the configuration No-Buffer Seq-no Socket Q-overflow Unknown-Pkt Buffer allocation failure A sequence no errors occurred during the database exchange process Socket Read/Write operation error Packet(s) dropped due to queue overflow Received packet is not an OSPF packet Example The show ip ospf process-id statistics command displays the error packet count received on each interface as: • The hello-timer remaining value for each interface • The wait-timer remaining value for each interface • The grace-timer remaining value for each interface • The packet count received and transmitted for each neighbor • Dead timer remaining value for each neighbor • Transmit timer remaining value for each neighbor • The LSU Q length and its highest mark for each neighbor • The LSR Q length and its highest mark for each neighbor FTOS#show ip ospf 100 statistics Interface GigabitEthernet 0/8 Hello-Timer 9, Wait-Timer 0, Grace-Timer 0 Error packets (Only for RX) Intf-Down Wrong-Len Auth-Error Version SeqNo-Err 0 Non-Dr 0 Invld-Nbr 0 MD5-Error 0 AreaMisMatch 0 Unkown-Pkt 0 Self-Org 0 0 Nbr-State 0 0 Cksum-Err 0 0 Conf-Issue 0 0 Neighbor ID 9.1.1.2 Hello DDiscr LSReq LSUpd LSAck RX 59 3 1 1 1 TX 62 2 1 0 0 Dead-Timer 37, Transmit-Timer 0 LSU-Q-Len 0, LSU-Q-Wmark 0 LSR-Q-Len 0, LSR-Q-Wmark 1 1132 | Open Shortest Path First (OSPFv2)