Dell Force10 S4820T FTOS Command Reference Guide - Page 892

www.dell.com | support.dell.com Table 27-4. show ip bgp summary Command Fields Field BGP AS-PATH entries BGP community entries Dampening enabled Neighbor AS MsgRcvd MsgSent TblVer InQ OutQ Up/Down State/Pfx Description Displays the number of BGP AS_PATH attributes processed and the amount of memory used to process them. Displays the number of BGP COMMUNITY attributes processed and the amount of memory used to process them. The show ip bgp ipv6 unicast community command provides more details on the COMMUNITY attributes. Displayed only when dampening is enabled. Displays the number of paths designated as history, dampened, or penalized. Displays the BGP neighbor address. Displays the AS number of the neighbor. Displays the number of BGP messages that neighbor received. Displays the number of BGP messages that neighbor sent. Displays the version of the BGP table that was sent to that neighbor. Displays the number of messages from that neighbor waiting to be processed. Displays the number of messages waiting to be sent to that neighbor. If a number appears in parentheses, the number represents the number of messages waiting to be sent to the peer group. Displays the amount of time (in hours:minutes:seconds) that the neighbor is in the Established stage. If the neighbor has never moved into the Established stage, the word never is displayed. If the neighbor is in Established stage, the number of network prefixes received. If a maximum limit was configured with the neighbor maximum-prefix command, (prfxd) appears in this column. If the neighbor is not in Established stage, the current stage is displayed (Idle, Connect, Active, OpenSent, OpenConfirm) When the peer is transitioning between states and clearing the routes received, the phrase (Purging) may appear in this column. If the neighbor is disabled, the phrase (Admin shut) appears in this column. 892 | IPv6 Border Gateway Protocol (IPv6 BGP)