Dell Force10 S4820T FTOS Command Reference Guide - Page 910

www.dell.com | support.dell.com default-information originate e Generate a default route into an IS-IS routing domain and controls the distribution of default information. Syntax default-information originate [always] [metric metric] [route-map map-name] To disable the generation of a default route into the specified IS-IS routing domain, enter the no default-information originate [always] [metric metric] [route-map map-name] command. Parameters always metric metric route-map map-name (OPTIONAL) Enter the keyword always to have the default route always advertised (OPTIONAL) Enter the keyword metric followed by a number to assign to the route. Range: 0 to 16777215 (OPTIONAL) A default route will be generated by the routing process if the route map is satisfied. Defaults Not configured. Command Modes ROUTER ISIS (for IPv4) CONFIGURATION-ROUTER-ISIS-ADDRESS-FAMILY-IPV6 (for IPv6) Command History Version 8.3.19.0 Version 8.3.12.0 Version 7.5.1.0 Version 6.3.1.0 Introduced on S4820T Introduced on S4810 Introduced IPv6 ISIS support Introduced Usage Information When you use this command to redistribute routes into a routing domain, the router becomes an autonomous system (AS) boundary router. An AS boundary router does not always generate a default route into a routing domain. The router still requires its own default route before it can generate one. How a metric value assigned to a default route is advertised depends on how on the configuration of the metric-style command. If the metric-style is set for narrow mode and the metric value in the default-information originate command is set to a number higher than 63, the metric value advertised in LSPs will be 63. If the metric-style is set for wide mode, their the metric value in the default-information originate command is advertised. Related Commands redistribute isis metric metric-style show isis database Redistribute routes from one routing domain to another routing domain. Configure a metric for an interface Set the metric style for the router. Display the IS-IS link state database. 910 | Intermediate System to Intermediate System (IS-IS)