Dell Force10 S4820T FTOS Command Reference Guide - Page 937
redistribute bgp Command Example
View all Dell Force10 S4820T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 937 highlights
Example Figure 29-1. redistribute bgp Command Example FTOS(conf)#router is FTOS(conf-router_isis)#redistribute bgp 1 level-1 metric 32 metric-type external route-map rmap-isis-to-bgp FTOS(conf-router_bgp)#show running-config isis ! router isis redistribute bgp 1 level-1 metric 32 metric-type external route-map rmap-isis-to-bgp Command History Version 8.3.19.0 Version 8.3.12.0 Version 7.5.1.0 Version 6.3.1.0 Introduced on S4820T Introduced on S4810 Introduced IPv6 ISIS support Introduced Usage Information BGP to IS-IS redistribution supports "match" options using route maps. The metric value, level, and metric-type of redistributed routes can be set by the redistribution command. More advanced "set" options can be performed using route maps. redistribute ospf e Redistribute routing information from an OSPF process. Syntax redistribute ospf process-id [level-1| level-1-2 | level-2] [match {internal | external}] [metric metric-value] [metric-type {external | internal}] [route-map map-name] To return to the default values, enter the no redistribute ospf process-id [level-1| level-1-2 | level-2] [match {internal | external}] [metric metric-value][metric-type {external | internal}] [route-map map-name] command. Parameters process-id metric metric-value metric-type {external | internal} level-1 level-1-2 level-2 Enter a number that corresponds to the OSPF process ID to be redistributed. Range: 1 to 65355 (OPTIONAL) The value used for the redistributed route. You should use a metric value that is consistent with the destination protocol. Range: 0 to 16777215 Default: 0. (OPTIONAL) The external link type associated with the default route advertised into a routing domain. The two options are: • external • internal (OPTIONAL) Routes are independently redistributed into IS-IS as Level 1 routes. (OPTIONAL) Routes are independently redistributed into IS-IS as Level-1-2 routes. (OPTIONAL) Routes are independently redistributed into IS-IS as Level 2 routes. This is the default. Intermediate System to Intermediate System (IS-IS) | 937