Dell Force10 S4820T FTOS Command Reference Guide - Page 836

www.dell.com | support.dell.com Parameters Defaults Command Modes Command History Usage Information Related Commands ipv6-address peer-group-name number Not configured. ROUTER BGP Enter the IPv6 address in the x:x:x:x::x format. The :: notation specifies successive hexadecimal fields of zeros. Enter the name of the peer group to enter the remote AS into routing tables of all routers within the peer group. Enter a number of the AS. Range: 1 to 65535. Version 8.3.19.0 Version 8.4.2.1 Version 8.2.1.0 Version 7.4.1.0 Introduced on S4820T Introduced on C-Series and S4810 Introduced on E-Series ExaScale Introduced on E-Series TeraScale If the number parameter is the same as the AS number used in the router bgp command, the remote AS entry in the neighbor is considered an internal BGP peer entry. This command creates a peer and the newly created peer is disabled (shutdown). router bgp Enter the ROUTER BGP mode and configure routes in an AS. neighbor remove-private-as c e Remove private AS numbers from the AS-PATH of outgoing updates. Syntax Parameters Defaults Command Modes Command History neighbor {ipv6-address | peer-group-name} remove-private-as To return to the default, use the no neighbor {ipv6-address | peer-group-name} remove-private-as command. ipv6-address peer-group-name Enter the IPv6 address in the x:x:x:x::x format. The :: notation specifies successive hexadecimal fields of zeros. Enter the name of the peer group to remove the private AS numbers Disabled (that is, private AS number are not removed). ROUTER BGPV6-ADDRESS FAMILY Version 8.3.19.0 Introduced on S4820T Version 8.4.2.1 Introduced on C-Series and S4810 836 | IPv6 Border Gateway Protocol (IPv6 BGP)