Dell Force10 S4820T FTOS Command Reference Guide - Page 94

www.dell.com | support.dell.com Command History Usage Information Example (IPv4) Example (IPv6) Version 8.3.19.0 Version 8.3.12.0 Version 8.5.1.0 Version 8.4.1.0 Version 8.3.1.0 Version 8.2.1.0 Version 8.1.1.0 Version 7.9.1.0 Version 7.6.1.0 Version 7.5.1.0 Version 7.4.1.0 Added support for outgoing-interface option for link-local IPv6 addressing on the S4820T. Added support for outgoing-interface option for link-local IPv6 addressing on the S4810. Added support for 4-port 40G line cards on ExaScale. IPv6 pinging available on management interface. Introduced extended ping options. Introduced on E-Series ExaScale (IPv6) Introduced on E-Series ExaScale (IPv4) Introduced VRF Introduced on S-Series Introduced support for C-Series Added support for IPv6 address on E-Series When you enter the ping command without specifying an IP/IPv6 address (Extended Ping), you are prompted for a target IP/IPv6 address, a repeat count, a datagram size (up to 1500 bytes), a timeout in seconds, and for Extended Commands. Chapter 21, ICMP Message Types for information on the ICMP message codes that return from a ping command. FTOS#ping 172.31.1.255 Type Ctrl-C to abort. Sending 5, 100-byte ICMP Echos to 172.31.1.255, timeout is 2 seconds: Reply to request 1 from 172.31.1.208 0 ms Reply to request 1 from 172.31.1.216 0 ms Reply to request 1 from 172.31.1.205 16 ms : : Reply to request 5 from 172.31.1.209 0 ms Reply to request 5 from 172.31.1.66 0 ms Reply to request 5 from 172.31.1.87 0 ms FTOS# FTOS#ping 100::1 Type Ctrl-C to abort. Sending 5, 100-byte ICMP Echos to 100::1, timeout is 2 seconds: !!!!! Success rate is 100.0 percent (5/5), round-trip min/avg/max = 0/0/0 (ms) FTOS# 94 | Control and Monitoring