Dell Force10 S4820T FTOS Command Reference Guide - Page 932
maximum-paths, metric-style
View all Dell Force10 S4820T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 932 highlights
www.dell.com | support.dell.com maximum-paths e Allows you to configure the maximum number of equal cost paths allowed in a routing table. Syntax maximum-paths number To return to the default values, enter no maximum-paths. Parameters number Enter a number as the maximum number of parallel paths an IP routing installs in a routing table. Range: 1 to 16. Default: 4 Defaults 4 Command Mode ROUTER ISIS (for IPv4) CONFIGURATION-ROUTER-ISIS-ADDRESS-FAMILY-IPV6 (for IPv6) Command History Version 8.3.19.0 Version 8.3.12.0 Version 7.8.1.0 Version 6.3.1.0 Introduced on S4820T Introduced on S4810 Introduced multi-topology ISIS support Introduced metric-style e Configure a router to generate and accept old-style, new-style, or both styles of type, length, and values (TLV). Syntax metric-style {narrow [transition] | transition | wide [transition]} [level-1 | level-2] To return to the default values, enter the no metric-style {narrow [transition] | transition | wide [transition]} [level-1 | level-2] command. Parameters narrow transition wide level-1 level-2 Allows you to configure the E-Series to generate and accept old-style TLVs. Metric range: 0 to 63 Allows you to configure the E-Series to generate both old-style and new-style TLVs. Metric range: 0 to 63 Allows you to configure the E-Series to generate and accept only new-style TLVs. Metric range: 0 to 16777215 Enables the metric style on Level 1. Enables the metric style on Level 2. Defaults narrow; if no Level is specified, Level-1 and Level-2 are configured. Command Modes ROUTER ISIS 932 | Intermediate System to Intermediate System (IS-IS)