Dell Force10 S4820T FTOS Command Reference Guide - Page 372

www.dell.com | support.dell.com The show ip bgp community command without any parameters lists BGP routes with at least one BGP community attribute and the output is the same as for the show ip bgp command output. Table 9-3. Command Example Fields: show ip bgp community Field Network Next Hop Metric LocPrf Weight Path Description Displays the destination network prefix of each BGP route. Displays the next hop address of the BGP router. If 0.0.0.0 is listed in this column, then local routes exist in the routing table. Displays the BGP route's metric, if assigned. Displays the BGP LOCAL_PREF attribute for the route. Displays the route's weight Lists all the ASs the route passed through to reach the destination network. Command History Version 8.3.19.0 Version 8.3.7.0 Version 7.8.1.0 Version 7.7.1.0 Introduced on the S4820T. Introduced on the S4810. Introduced support on S-Series Introduced support on C-Series show ip bgp community-list c e s View routes that are affected by a specific community list. Syntax Parameters Command Modes Example show ip bgp [ipv4 unicast] community-list community-list-name [exact-match] ipv4 unicast community-list-name exact-match (OPTIONAL) Enter the ipv4 unicast keywords to view information only related to ipv4 unicast routes. Enter the name of a configured IP community list. (max 16 chars) Enter the keyword for an exact match of the communities. EXEC EXEC Privilege FTOS#show ip bgp community-list pass BGP table version is 0, local router ID is 10.101.15.13 Status codes: s suppressed, d damped, h history, * valid, > best Path source: I - internal, a - aggregate, c - confed-external, r - redistributed, n - network Origin codes: i - IGP, e - EGP, ? - incomplete Network Next Hop Metric LocPrf Weight Path 372 | Border Gateway Protocol IPv4 (BGPv4)