Dell Force10 S4820T FTOS Command Reference Guide - Page 1545

Command Modes Command History Usage Information Related Commands INTERFACE Version 8.3.19.0 Version 8.3.8.0 Introduced on S4820T Introduced on S4810 This command applies to a single interface.When used in conjunction with the vrrp delay reload CLI, the later timer rules the VRRP enabling. For example, if vrrp delay reload is 600 and the vrrp delay minimum is 300: • When the system reloads, VRRP waits 600 seconds (10 minutes) to bring up VRRP on all interfaces that are up and configured for vrrp. • When an interface comes up, whether as part of a system reload or an interface reload, the system waits 300 seconds (5 minutes) to bring up VRRP on that interface. vrrp delay reload Set the delay time for VRRP initialization after a system reboot. vrrp delay reload Set the delay time for VRRP initialization after a system reboot. Syntax Parameters Defaults Command Modes Command History Usage Information vrrp delay minimum seconds seconds Enter the number of seconds for the delay. Range: 0 to 900 (0 indicates no delay) 0 INTERFACE Version 8.3.19.0 Version 8.3.8.0 Introduced on S4820T Introduced on S4810 This command applies to a all the VRRP configured interfaces on a system. When used in conjunction with the vrrp delay minimum CLI, the later timer rules the VRRP enabling. For example, if vrrp delay reload is 600 and the vrrp delay minimum is 300: • When the system reloads, VRRP waits 600 seconds (10 minutes) to bring up VRRP on all interfaces that are up and configured for vrrp. • When an interface comes up, whether as part of a system reload or an interface reload, the system waits 300 seconds (5 minutes) to bring up VRRP on that interface. Virtual Router Redundancy Protocol (VRRP) | 1545