Dell Force10 S4820T FTOS Command Reference Guide - Page 1068
clear ipv6 neighbors
View all Dell Force10 S4820T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1068 highlights
www.dell.com | support.dell.com • ipv6 nd managed-config-flag • ipv6 nd max-ra-interval • ipv6 nd mtu • ipv6 nd other-config-flag • ipv6 nd prefix • ipv6 nd ra-lifetime • ipv6 nd reachable-time • ipv6 nd suppress-ra • ipv6 neighbor • show ipv6 neighbors clear ipv6 neighbors e Delete all entries in the IPv6 neighbor discovery cache, or neighbors of a specific interface. Static entries will not be removed using this command. Syntax Parameters Command Modes Command History clear ipv6 neighbors [ipv6-address] [interface] ipv6-address interface interface EXEC EXEC Privilege Enter the IPv6 address of the neighbor in the x:x:x:x::x format to remove a specific IPv6 neighbor. The :: notation specifies successive hexadecimal fields of zero. To remove all neighbor entries learned on a specific interface, enter the keyword interface followed by the interface type and slot/port or number information of the interface: • For a Fast Ethernet interface, enter the keyword fastEthernet followed by the slot/port information. • For a 1-Gigabit Ethernet interface, enter the keyword GigabitEthernet followed by the slot/port information. • For a Port Channel interface, enter the keyword port-channel followed by a number: E-Series Range: 1 to 32 for EtherScale, 1 to 255 for TeraScale and 1 to 512 for ExaScale. • For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet followed by the slot/port information. • For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE followed by the slot/port information. • For a VLAN, enter the keyword vlan followed by the VLAN ID. The range is from 1 to 4094. Version 8.3.19.0 Introduced on S4820T Version 8.3.7.0 Introduced on S4810 1068 | Neighbor Discovery Protocol (NDP)