Dell Force10 S4820T FTOS Command Reference Guide - Page 1432

www.dell.com | support.dell.com Parameters Defaults Command Modes Command History Usage Information Related Commands level (OPTIONAL) Indicate a value from 0 to 7 or enter one of the following equivalent words: emergencies, alerts, critical, errors, warnings, notifications, informational, or debugging. Default: 7 or debugging. size (OPTIONAL) Indicate the size, in bytes, of the logging buffer. The number of messages buffered depends on the size of each message. Range: 40960 to 524288. Default: 40960 bytes. level = 7; size = 40960 bytes CONFIGURATION Version 8.3.19.0 Introduced on S4820T Version 8.3.11.1 Introduced on Z9000 Version 8.3.7.0 Introduced on S4810 Version 7.6.1.0 Support added for S-Series Version 7.5.1.0 Support added for C-Series E-Series legacy command When you decrease the buffer size, all messages stored in the buffer are lost. Increasing the buffer size does not affect messages stored in the buffer. clear logging default logging buffered show logging Clear the logging buffer. Returns the logging buffered parameters to the default setting. Display the logging setting and system messages in the internal buffer. logging console c e s z Specify which messages are logged to the console. Syntax logging console [level] To return to the default values, enter default logging console. To disable logging to the console, enter no logging console. Parameters level (OPTIONAL) Indicate a value from 0 to 7 or enter one of the following parameters: emergencies, alerts, critical, errors, warnings, notifications, informational, or debugging. Default: 7 or debugging. Defaults 7 or debugging Command Modes CONFIGURATION 1432 | Simple Network Management Protocol and Syslog