Dell Force10 S4820T FTOS Command Reference Guide - Page 905

Command History Version 8.3.19.0 Version 8.3.12.0 Introduced on S4820T Introduced on S4810 Usage Use the area-password command on routers within an area to prevent the link state database from Information receiving incorrect routing information from unauthorized routers. The password configured is injected into Level 1 LSPs, CSNPs, and PSNPs. Related Commands domain-password isis password Allows you to set the authentication password for a routing domain. Allows you to configure an authentication password for an interface. clear config e Clear IS-IS configurations that display under the router isis heading of the show running-config command output. Syntax clear config Command Modes ROUTER ISIS Usage Use caution when you enter this command. Back up your configuration prior to using this command or Information your IS-IS configuration will be erased. Related Commands copy Use this command to save the current configuration to another location. clear isis e Restart the IS-IS process. All IS-IS data is cleared. Syntax clear isis [tag] {* | database | traffic} Parameters tag * database traffic (Optional) Enter an alphanumeric string to specify the IS-IS routing tag area. Enter the keyword * to clear all IS-IS information and restarts the IS-IS process. This command removes IS-IS neighbor information and IS-IS LSP database information and the full SPF calculation will be done. Clears IS-IS LSP database information. Clears IS-IS counters. Command Modes EXEC Privilege Command History Version 8.3.19.0 Version 8.3.12.0 Introduced on S4820T Introduced on S4810 Intermediate System to Intermediate System (IS-IS) | 905