Dell Force10 S4820T FTOS Command Reference Guide - Page 786
The Management port is enabled by default, command to assign an IPv6 address to the Management port.
View all Dell Force10 S4820T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 786 highlights
www.dell.com | support.dell.com linecard slot-number managementethernet slot/ port loopback port-channel tengigabitethernet fortyGigE vlan (OPTIONAL) View information for a specific IPv6 linecard or S-Series stack-unit Range: 0 to 13 on a E1200, 0 to 6 on a E600, and 0 to 5 on a E300. Range: 0 to 7 for C-Series Range: 0 to 7 for S55 only Range: 0 to 11 for S60, S4810, and S4820T (OPTIONAL) View information on an IPv6 Management port. Enter the slot number (0-1) and port number zero (0). (OPTIONAL) View information for IPv6 loopback interfaces. (OPTIONAL) View information for IPv6 port channels. (OPTIONAL) View information for an IPv6 tengigabitethernet interface. (OPTIONAL) View information for an IPv6 fortygigabitethernet interface. (OPTIONAL) View information for IPv6 VLANs. Defaults Command Modes No default values or behavior EXEC Command History EXEC Privilege Version 8.3.19.0 Version 8.3.7.0 Version 8.5.1.0 Version 8.4.2.1 Version 8.2.1.0 Version 7.8.1.0 Version 7.4.1.0 Introduced on the S4820T Introduced on the S4810 Added support for 4-port 40G line cards on ExaScale. Introduced on S-Series Introduced on E-Series ExaScale. Support for the managementethernet slot/port parameter was added. Introduced on C-Series Introduced on E-Series TeraScale Usage Information Example (show ipv6 interface) The Management port is enabled by default (no shutdown). If necessary, use the ipv6 address command to assign an IPv6 address to the Management port. FTOS# FTOS#show ipv6 int te 0/5 TenGigabitEthernet 0/5 is up, line protocol is up IPV6 is enabled Link Local address: fe80::201:e8ff:fe8a:e8f7 Global Unicast address(es): 2001::1, subnet is 2001::/64 2002::1, subnet is 2002::/120 2003::1, subnet is 2003::/120 2004::1, subnet is 2004::/32 Global Anycast address(es): Joined Group address(es): ff02::1 ff02::2 ff02::1:ff00:1 ff02::1:ff8a:e8f7 ND MTU is 0 786 | IPv6 Basics