Dell Force10 S4820T FTOS Command Reference Guide - Page 1523

Command History Version 8.3.19.0 Version 8.3.12.0 Introduced on S4820T Introduced on S4810 peer-link port-channel Configure the specified port channel as the chassis interconnect trunk between VLT peers in the domain. Syntax Parameters Defaults Command Modes Command History Usage Information peer-link port-channel port-channel-number {peer-down-vlan vlan id} port-channelnumber peer-down-vlan vlan id Enter the port-channel number that will act as the interconnect trunk. (Optional) Configure the VLAN that the VLT peer link uses when the VLT peer is down. Not configured. VLT DOMAIN Version 8.3.19.0 Version 8.3.12.0 Version 8.3.8.0 Introduced on S4820T Added support for peer-down-vlan parameter. Introduced on S4810 Use peer-down-vlan to configure the VLAN from where the VLT peer forwards packets received over the VLTi from an adjacent VLT peer that is down. When a VLT peer with Bare Metal Provisioning (BMP) is booting up, it sends untagged DHCP discover packets to its peer over the VLTi. Use this configuration to ensure that the DHCP discover packets are forwarded to the VLAN on the DHCP server. primary-priority Assign the priority for master election among VLT peers. Syntax Parameters Default [no] primary-priority value To configure the primary role on a VLT peer, enter a lower value than the priority value of the remote peer. Range: 1 to 65535. 32768 Virtual Link Trunking (VLT) | 1523