Dell Force10 S4820T FTOS Command Reference Guide - Page 873

Command History Usage Information Related Commands Version 8.3.19.0 Version 8.4.2.1 Version 7.4.1.0 Introduced on S4820T Introduced on C-Series and S4810 Introduced on E-Series TeraScale By default, when a neighbor/peer group configuration is created in the Router BGP context, it is enabled for the IPv6/Unicast AFI/SAFI. By using activate in the new context, the neighbor/peer group is enabled for AFI/SAFI. address family Changes the context to SAFI neighbor advertisement-interval c e Set the advertisement interval between BGP neighbors or within a BGP peer group. Syntax neighbor {ipv6-address | peer-group-name} advertisement-interval seconds To return to the default value, use the no neighbor {ipv6-address | peer-group-name} advertisement-interval command. Parameters ipv6-address peer-group-name seconds (OPTIONAL) Enter the IPv6 address in the x:x:x:x::x format. The :: notation specifies successive hexadecimal fields of zeros. Enter the name of the peer group to set the advertisement interval for all routers in the peer group. Enter a number as the time interval, in seconds, between BGP advertisements. Range: 0 to 600 seconds. Default: 5 seconds for internal BGP peers; 30 seconds for external BGP peers. Defaults seconds = 5 seconds (internal peers); seconds = 30 seconds (external peers) Command Modes ROUTER BGPV6-ADDRESS FAMILY Command History = Version 8.3.19.0 Version 8.4.2.1 Version 7.4.1.0 Introduced on S4820T Introduced on C-Series and S4810. Introduced on E-Series TeraScale neighbor default-originate c e Inject the default route to a BGP peer or neighbor. Syntax neighbor {ipv6-address | peer-group-name} default-originate [route-map map-name] IPv6 Border Gateway Protocol (IPv6 BGP) | 873