Dell Force10 S4820T FTOS Command Reference Guide - Page 1073
show ipv6 neighbors
View all Dell Force10 S4820T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1073 highlights
Parameters Defaults Command Modes Command History ipv6-address interface interface hardware_address Enter the IPv6 address of the neighbor in the x:x:x:x::x format. The :: notation specifies successive hexadecimal fields of zero Enter the keyword interface followed by the interface type and slot/ port or number information: • For a Fast Ethernet interface, enter the keyword fastEthernet followed by the slot/port information. • For a 1-Gigabit Ethernet interface, enter the keyword GigabitEthernet followed by the slot/port information. • For a Port Channel interface, enter the keyword port-channel followed by a number: E-Series Range: 1 to 32 for EtherScale, 1 to 255 for TeraScale and 1 to 512 for ExaScale. • For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet followed by the slot/port information. • For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE followed by the slot/port information. Enter a 48-bit hardware MAC address in nn:nn:nn:nn:nn:nn format. No default behavior or values CONFIGURATION Version 8.3.19.0 Introduced on S4820T Version 8.3.7.0 Introduced on S4810 show ipv6 neighbors e Display IPv6 discovery information. Entering the command without options shows all IPv6 neighbor addresses stored on the CP (control processor). Syntax Parameters show ipv6 neighbors [ipv6-address] [cpu {rp1 [ipv6-address] | rp2 [ipv6-address]}] [interface interface] ipv6-address Enter the IPv6 address of the neighbor in the x:x:x:x::x format. The :: notation specifies successive hexadecimal fields of zero Neighbor Discovery Protocol (NDP) | 1073