Dell Force10 S4820T FTOS Command Reference Guide - Page 346

www.dell.com | support.dell.com neighbor local-as c e s Configure Internal BGP (IBGP) routers to accept external routes from neighbors with a local AS number in the AS number path Syntax Parameters Defaults Command Modes Related Commands Command History neighbor {ip-address | peer-group-name} local-as as-number [no-prepend] To return to the default value, use the no neighbor {ip-address | peer-group-name} local-as command. ip-address peer-group-name as-number no prepend Enter the IP address of the neighbor in dotted decimal format. Enter the name of the peer group to set the advertisement interval for all routers in the peer group. Enter the AS number to reset all neighbors belonging to that AS. Range: 0-65535 (2-Byte) or 1-4294967295 (4-Byte) or 0.1-65535.65535 (Dotted format) Specifies that local AS values are not prepended to announcements from the neighbor. Not configured. ROUTER BGP bgp four-octet-as-support Enable 4-Byte support for the BGP process. Version 8.3.19.0 Version 8.3.7.0 Version 7.8.1.0 Version 7.7.1.0 Introduced on the S4820T. Introduced on the S4810. Introduced support on S-Series Introduced command Introduced support on C-Series neighbor maximum-prefix c e s Control the number of network prefixes received. Syntax neighbor {ip-address | peer-group-name} maximum-prefix maximum [threshold] [warning-only] To return to the default values, use the no neighbor {ip-address | peer-group-name} maximum-prefix maximum command. 346 | Border Gateway Protocol IPv4 (BGPv4)