Dell Force10 S4820T FTOS Command Reference Guide - Page 909

Version 8.3.12.0 Version 6.3.1.0 Introduced on S4810 Introduced debug isis spf-triggers e Enable debugging on the events that triggered IS-IS shortest path first (SPF) events for debugging purposes. Syntax debug isis spf-triggers To turn off debugging, enter no debug isis spf-triggers. Command Modes EXEC Privilege Command History Version 8.3.19.0 Version 8.3.12.0 Version 6.3.1.0 Introduced on S4820T Introduced on S4810 Introduced debug isis update-packets e Enable debugging on Link State PDUs (LSPs) that are detected by a router. Syntax debug isis update-packets [interface] To turn off debugging, enter the no debug isis update-packets [interface] command. Parameters interface (OPTIONAL) Identifies the interface type slot/port as one of the following: • For a 1-Gigabit Ethernet interface, enter the keyword GigabitEthernet followed by the slot/port information. • For a Port Channel interface, enter the keyword port-channel followed by a number: C-Series and S-Series Range: 1-128 E-Series Range: 1 to 32 for EtherScale, 1 to 255 for TeraScale and 1 to 512 for ExaScale. • For a SONET interface, enter the keyword sonet followed by the slot/port information. • For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet followed by the slot/port information. • For a VLAN, enter the keyword vlan followed by a number from 1 to 4094. Command Modes EXEC Privilege Command History Version 8.3.19.0 Version 8.3.12.0 Version 6.3.1.0 Introduced on S4820T Introduced on S4810 Introduced Intermediate System to Intermediate System (IS-IS) | 909