Dell Force10 S4820T FTOS Command Reference Guide - Page 1254

www.dell.com | support.dell.com Note: In a Layer 2 Policy Map, IPv4/IPv6 rules are not allowed and hence the output contains only L2ACL CAM partition entries. Table 42-7. test cam-usage Command Example Fields Field Linecard Portpipe CAM Partition Available CAM Estimated CAM per Port Status (Allowed ports) Description Indicates the line card slot number. Indicates the portpipe number. The CAM space where the rules are added. Indicates the free CAM space, in the partition, for the classification rules. Note: The CAM entries reserved for the default rules are not included in the Available CAM column; free entries, from the default rules space, can not be used as a policy map for the classification rules. Indicates the number of free CAM entries required (for the classification rules) to apply the input policy map on a single interface. Note: The CAM entries for the default rule are not included in this column; a CAM entry for the default rule is always dedicated to a port and is always available for that interface. Indicates if the input policy map configuration on an interface belonging to a linecard/port-pipe is successful-Allowed (n)-or not successful-Exception. The allowed number (n) indicates the number of ports in that port-pipe on which the Policy Map can be applied successfully. Usage This features allows you to determine if the CAM has enough space available before applying Information the configuration on an interface. An input policy map with both Trust and Class-map configuration, the Class-map rules are ignored and only the Trust rule is programmed in the CAM. In such an instance, the Estimated CAM output column will contain the size of the CAM space required for the Trust rule and not the Class-map rule. threshold e Specify the minimum and maximum threshold values for the configured WRED profiles. Syntax threshold min number max number To remove the threshold values, use the no threshold min number max number command. 1254 | Quality of Service (QoS)