Dell Force10 S4820T FTOS Command Reference Guide - Page 327

Version 7.8.1.0 Version 7.7.1.0 Version 7.5.1.0 Introduced support on S-Series Introduced support on C-Series Introduced clear ip bgp c e s Reset BGP sessions on the E-Series. The soft parameter (BGP Soft Reconfiguration) clears the policies without resetting the TCP connection. Syntax Parameters Command Modes Related Commands Command History clear ip bgp * | as-number | ip-address [flap-statistics | soft [in | out]] * as-number ip-address flap-statistics soft in out EXEC Privilege Enter an asterisk ( * ) to reset all BGP sessions. Enter the AS number to reset all neighbors belonging to that AS. Range: 0 to 65535 (2-Byte) or 1 to 4294967295 (4-Byte) or 0.1 to 65535.65535 (Dotted format) Enter an IP address in dotted decimal format to reset all prefixes from that neighbor. (OPTIONAL) Enter the keyword flap-statistics to reset the flap statistics on all prefixes from that neighbor. (OPTIONAL) Enter the keyword soft to configure and activate policies without resetting the BGP TCP session, that is, BGP Soft Reconfiguration. Note: If you enter clear ip bgp ip-address soft, both inbound and outbound policies are reset. (OPTIONAL) Enter the keyword in to activate only inbound policies. (OPTIONAL) Enter the keyword out to activate only outbound policies. bgp recursive-bgp-next-hop bgp soft-reconfig-backup Disable next-hop resolution through other routes learned by BGP Turn on BGP Soft Reconfiguration Version 8.3.19.0 Version 8.3.7.0 Version 7.8.1.0 Version 7.7.1.0 Version 6.5.1.0 Introduced on the S4820T. Introduced on the S4810. Introduced support on S-Series Introduced support on C-Series Expanded to include the as-number option Border Gateway Protocol IPv4 (BGPv4) | 327